s4 and s5 engine difference
06-26-10, 08:32 AM
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: NY
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
s4 and s5 engine difference
I have few questions about the differences between s4 and s5 driventrain.
1) are s5 and ans s4 rotor housing the same?
2) what about irons?
3) can s5 intake manfolds bolt to s4 engine?
4) Can I drop a s4 engine/harness/ecu into a s5 car? assuming I have the complete engine with accessories. do I need to swap the tranny as well?
5) if so, can I use s5 driveshaft? or have to use s4 driveshaft?
thanks
1) are s5 and ans s4 rotor housing the same?
2) what about irons?
3) can s5 intake manfolds bolt to s4 engine?
4) Can I drop a s4 engine/harness/ecu into a s5 car? assuming I have the complete engine with accessories. do I need to swap the tranny as well?
5) if so, can I use s5 driveshaft? or have to use s4 driveshaft?
thanks
06-26-10, 10:34 AM
#3
I have few questions about the differences between s4 and s5 driventrain.
1) are s5 and ans s4 rotor housing the same?
2) what about irons?
3) can s5 intake manfolds bolt to s4 engine?
4) Can I drop a s4 engine/harness/ecu into a s5 car? assuming I have the complete engine with accessories. do I need to swap the tranny as well?
5) if so, can I use s5 driveshaft? or have to use s4 driveshaft?
thanks
1) are s5 and ans s4 rotor housing the same?
2) what about irons?
3) can s5 intake manfolds bolt to s4 engine?
4) Can I drop a s4 engine/harness/ecu into a s5 car? assuming I have the complete engine with accessories. do I need to swap the tranny as well?
5) if so, can I use s5 driveshaft? or have to use s4 driveshaft?
thanks
1) No
2) No
3) Not without modifications.
4) Sure, but you will have to rewire the entire car to run it
5) Driveshaft's are the same
You will learn even more about your questions if you search.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
befarrer
Microtech
3
08-22-15 05:52 PM
