I have some snapped off studs on my rear wheels. I was wondering if anyone knew for sure if you could replace just the studs or if the studs are a part of the hub in which case I would need new rear hubs. The car is a S4 TII by the way. Thanks in advance.

Zach

 

You can replace just the studs, had to do a few myself. They just press into the hub

 

Cool. Thanks bro. Do you remember off hand what length, thread, and pitch you need for our studs?

 

You can get the studs at any "upper level" parts house, (NAPA, CarQuest, Etc.). Use a steel wheel lugnut, with flat side towards the hub, use plenty of penetrant oil and pull the studs into the hub with an impact gun.

good luck,

 

Thanks for the tip Billy. I'll take care of that this weekend.