S4 Newb Questions
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Raleigh NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
S4 Newb Questions
I am new to the FC and had a few questions, I've searched and still found no conclusive answers.
1. Can I use a Tommy Makinen Titanium Turbo on the FC with a stock turbo outlet (i.e. will it bolt on?)
2. Can I transfer a set of the front 4 piston calipers to the rear? Will it really help?
Thanks for all your help.
1. Can I use a Tommy Makinen Titanium Turbo on the FC with a stock turbo outlet (i.e. will it bolt on?)
2. Can I transfer a set of the front 4 piston calipers to the rear? Will it really help?
Thanks for all your help.
#3
Former Moderator. RIP Icemark.
Originally Posted by hexadec0079
I am new to the FC and had a few questions, I've searched and still found no conclusive answers.
1. Can I use a Tommy Makinen Titanium Turbo on the FC with a stock turbo outlet (i.e. will it bolt on?)
1. Can I use a Tommy Makinen Titanium Turbo on the FC with a stock turbo outlet (i.e. will it bolt on?)
2. Can I transfer a set of the front 4 piston calipers to the rear? Will it really help?
#4
Lives on the Forum
Originally Posted by hexadec0079
I am new to the FC and had a few questions, I've searched and still found no conclusive answers.
1. Can I use a Tommy Makinen Titanium Turbo on the FC with a stock turbo outlet (i.e. will it bolt on?)
2. Can I transfer a set of the front 4 piston calipers to the rear?
Will it really help?
-Ted
#5
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Raleigh NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, yes the Tommy Makinen Turbo is from the TME Lancer Evo 5, it is thin wall cast with titanium internals and makes boost really low, and sounds really cool.
PS- is there a exhaust manifold that will allow a 16-G or similar turbo?
PS- is there a exhaust manifold that will allow a 16-G or similar turbo?
#6
Lives on the Forum
Originally Posted by hexadec0079
Thanks, yes the Tommy Makinen Turbo is from the TME Lancer Evo 5, it is thin wall cast with titanium internals and makes boost really low, and sounds really cool.
PS- is there a exhaust manifold that will allow a 16-G or similar turbo?
PS- is there a exhaust manifold that will allow a 16-G or similar turbo?
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM