S4 Fogs
09-17-11, 08:31 PM
#1
S4 Fogs
My new to me s4 fog lights just came in and i was holding them up into my bumper and i dont understand what they are supposed to mount to. Was wondering if anyone had pictures with them installed with and without a bumper cover.
And im more then positive there are threads on how to wire them into a car that never had them so if someone could link me to that, that would be cool cuz i can not find one.
And im more then positive there are threads on how to wire them into a car that never had them so if someone could link me to that, that would be cool cuz i can not find one.
09-17-11, 09:16 PM
#4
Post pics. I've been trying to track an oem s4 set for a while. The oem's are rare and unheard of even in japan.
sure you don't have s5 fogs?
s4 fogs are seen here
https://www.rx7club.com/attachment.p...7&d=1304259178
09-18-11, 02:53 PM
#6
rip fc3s rx7
iTrader: (2)
Join Date: Oct 2009
Location: marina, califonia
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
a buddy of mine with an 86 gxl who is also member on this forum D. Gomes has a set of the finish line s4 fogs on his car ill see about getting you some pics.
Trending Topics
09-20-11, 12:32 AM
#13
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
The S4 FOGS were made by BOSCH. There is a smaller more streamline version that mount onto the S4 mounting bracket. The bracket is L shaped where the pillar of the L mounts to stock bolts and the fog is mounted to the horizontal part of the L.
The correct wiring is via a BOSCH relay, the power to the switch comes from the low beam positive. Power through the relay to the fogs comes from a fused connection to the battery. Fogs are supposed to go off when you hit the high beams, thus that configuration.
I've got a set of those brackets somewhere....................
Picture of the streamline fogs with Bosch covers on them from my old S4 TII (aka The Red Rocket).
The correct wiring is via a BOSCH relay, the power to the switch comes from the low beam positive. Power through the relay to the fogs comes from a fused connection to the battery. Fogs are supposed to go off when you hit the high beams, thus that configuration.
I've got a set of those brackets somewhere....................
Picture of the streamline fogs with Bosch covers on them from my old S4 TII (aka The Red Rocket).
12-30-12, 01:41 PM
#14
Hey guys! The dude around me w/ the fogs sold the fogs only to me! After hunting for them for so long... hahaha. Here's the info & pics:
Turns out they're pretty common lights w/ Euro cars: volvo, saab, porsche, etc... An Ebay search of "LE1473" will pull up quite a few results, just make sure the mounting hardware is the same as what I pictured. The car these came from had the bumper cut to fit these, though, so be ware of that. I'm going to put them on a car who's bumper I don't have much attachment to, so I don't cringe or cry giving it the knife. Enjoy!
Turns out they're pretty common lights w/ Euro cars: volvo, saab, porsche, etc... An Ebay search of "LE1473" will pull up quite a few results, just make sure the mounting hardware is the same as what I pictured. The car these came from had the bumper cut to fit these, though, so be ware of that. I'm going to put them on a car who's bumper I don't have much attachment to, so I don't cringe or cry giving it the knife. Enjoy!
12-30-12, 02:44 PM
#17
Rotary Enthusiast
Thread
Thread Starter
Forum
Replies
Last Post
