RX7 S5 TII differential LSD change,what I need ?
Thread Starter
Junior Member
Joined: Oct 2010
Posts: 47
Likes: 0
From: ita
RX7 S5 TII differential LSD change,what I need ?
I have a TII 1991.Maybe I want change my differential with a LSD 1.5way like Kaaza or Cusco.
My question is :
I need other parts, such stub shafts(from other rx7 version),pinion seals/bearing,or just buy the differential and swap it?
My question is :
I need other parts, such stub shafts(from other rx7 version),pinion seals/bearing,or just buy the differential and swap it?
you need stub shafts from an S4 TII, make sure they're the later version (there was a wierd version in early 87 that are too long for S5 TII axles.
it's probably also a good idea to replace the side carrier bearings and the stub axle seals:
86-95 Ring & Pinions, Bearings, and Seals
you don't have to/don't want to replace anything else since you're probably not taking the pinion out of the carrier.
it's probably also a good idea to replace the side carrier bearings and the stub axle seals:
86-95 Ring & Pinions, Bearings, and Seals
you don't have to/don't want to replace anything else since you're probably not taking the pinion out of the carrier.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM
