Rx7 aftermarket
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Location: Mass
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Rx7 aftermarket
Hello ive done some research already, but havent found much.I am new to rx7s and rotary motors in general, but Ive been looking into aftermarket for a rx7 since im going to be picking one up soon and cant seem to find any good website that look legitimate. Im mainly looking for suspension parts, and enjukuracing sells some coilovers, and sway bars, and ive found a place that sells a full bushing set, but where could i find tension rods all ends and links and stuff like that? Thank you for any advice anyone has!
#2
Senior Member
iTrader: (1)
Join Date: Jan 2009
Location: Florida
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the world of rotarys. Awesome cars but parts can be hard to come by you really have to look. Most people end up making there own end links and stuff. But mazdatrix is a good site but deals more with stock parts.
#3
Cake or Death?
iTrader: (2)
So, let's see...
You're new to the platform and haven't yet acquired the car but you've already decided the suspension needs to be replaced?
Better to spend some time with what you got before randomly throwing aftermarket stuff at it.
If your car is typical, I'll bet on day one you can find ten things to do more critical than bushing replacement.
You're new to the platform and haven't yet acquired the car but you've already decided the suspension needs to be replaced?
Better to spend some time with what you got before randomly throwing aftermarket stuff at it.
If your car is typical, I'll bet on day one you can find ten things to do more critical than bushing replacement.
Trending Topics
#9
Full Member
iTrader: (6)
Here's a link that has some stuff Reliability Mods
there's a ton of info on here though.
howard coleman has a nice thread on aux injection
https://www.rx7club.com/3rd-generati...fd-fix-806104/
#13
Rotary Enthusiast
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
I guess you got fooled by searching for rotary motors
#14
Passion for Racing
Join Date: Aug 2010
Location: Crown Point, Indiana
Posts: 1,066
Likes: 0
Received 2 Likes
on
2 Posts
Welcome! As you will find with most FC chassis on the market, you will be welcomed to your new platform with plenty of reliability mods to sort through first I've had three FCs in roughly a three year span, but because of dumb mistakes. It's been fun and i dont intend to stop. I find it increadible what Mazda was able to do to the car and still sell it for 1980's economy $26k. You'll grow to both love and hate our cars. And when I say hate, i mean the thermal operations using engine coolant and the electrical systems.but love partains to everything else
#15
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Location: Mass
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Haha yeh I drove ny first fc3c yesterday and I fell in love with it instantly haha. It had no problems with it, I'm picking it up Thursday probably. And furb I think that was the probably bahaah and yeh I'm defiantly going to order that book soon. Trying to learn as much as possible.
#18