rotary to v-6 swap
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
nope, its impossible, your stuck with your rotary motor for ever 
j/k
i guess if you go to grannyspeedshop they do v8's? maby 6's too, your not going to get alot of help here
j/k
i guess if you go to grannyspeedshop they do v8's? maby 6's too, your not going to get alot of help here
Senior Member
Joined: Jul 2001
Posts: 456
Likes: 0
From: Las Vegas
Re: rotary to v-6 swap
Originally posted by xxpezzxx
are there kit available to swap v-6 into rx-7
are there kit available to swap v-6 into rx-7
You can do it.
I have done it.
If you ask on this site you will develop a terminal disease and the undying enmity of the purists.
Go to:
www.torquecentral.com
and don't upset the natives here.
The Gods in this place are un-forgiving.
Check your PM's.
Last edited by 'Vert in Vegas; Jan 29, 2003 at 07:51 PM.
Re: Re: rotary to v-6 swap
Originally posted by 'Vert in Vegas
Yes.
You can do it.
I have done it.
If you ask on this site you will develop a terminal disease and the undying enmity of the purists.
Go to:
www.torquecentral.com
and don't upset the natives here.
The Gods in this place are un-forgiving.
Check your PM's.
Yes.
You can do it.
I have done it.
If you ask on this site you will develop a terminal disease and the undying enmity of the purists.
Go to:
www.torquecentral.com
and don't upset the natives here.
The Gods in this place are un-forgiving.
Check your PM's.
HEY!!!
Some of us "natives" are generally supportive of the V-6 and V-8 swap!
I wholeheartedly support the piston swappers here on the board and think that they have nice cars.
SHEESH!!!
Jarrett
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,273
Likes: 0
From: Ft. Worth, Texas, USA, Earth, Solar System...
Hmmmm... a V6 makes a lot more sense than a V8. One of the users on here has a Buick GN (turbo V6) engine in his car. I'm pretty sure the weight distribution with the V6 is a lot closer to stock than with a V8. I THINK the V8 mount kit would work on the V6, but I suggest contacting Granny's to be sure.
Brad
Brad
Thread Starter
Team Inertia
Joined: Jan 2003
Posts: 182
Likes: 0
From: California
i am going to swap a 88 gtu non turbo for a 1987 buick regal 3.8 f/i v6 turbo. can someone please tell me exactly what kit, driveline, and tranny i would need to get. thanx.
Last edited by xxpezzxx; Jan 30, 2003 at 12:15 AM.
Trending Topics
Full Member
Joined: Mar 2002
Posts: 104
Likes: 0
From: phoenix arizona
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
Mar 1, 2019 09:19 PM