hi all

i have a 87 turbo 2 i did a convertion from my se and aving no luck on how to remove the intake manifold ,so that i can put in my wiring harness to the motor
i dont know how many times this is posted.
. i need a link or step by step or advice!
sorry to say im not able to do it on my own ,and lack the know how . my problem is how do i take off the intake manifold off the top of the car i already removed the top mount intercooler.

basicly i just need to know which bolts to remove so that the intake manifold can be taken completely off plz help out guys any info will be great .

ill be in the back yard kicking and swearing .

 

I'm not sure what you're asking...You want to know how to remove the intake manifold so you can wire your engine? And you're actually in the middle of a TII swap?

Please see the factory service manuals. They are available for download for free. Links are in the FAQ. If you are trying to do a swap without them, you're going to have a very hard time.

 

yes im in the middle of a swap and stuck! yes i just want to know how to take appart the motor in a safe way so that i can remove the old wirring harness . the manifold is in the way , i cant unplug the connecters of the harness from the fuel rails since there mounted under the manifold sorry i dont have any pics of my current progress....

 

Proccedures for removing the manifold are in the manuals I suggested previously. They are very easy to remove.