2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Rev Limiter?

Thread Tools
 
Search this Thread
 
Old Oct 27, 2002 | 06:04 PM
  #1  
MazdaRx7Racer4Life's Avatar
Thread Starter
I AM A THIEF!! READ THE FEEDBACK SECTION!
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 86
Likes: 0
From: Miami, FL
Rev Limiter?

Does my 86 gxl have a rev limiter, if so, can i take it off to go faster.
Reply
Old Oct 27, 2002 | 06:11 PM
  #2  
emagdnim's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 202
Likes: 0
From: Bettendorf, IA
No, there is no rev limiter, just an annoying buzzer. Oh, and there's usually a reason for redlines and rev limiters, for safety. But more importantly, because your powerband stops there.
Reply
Old Oct 27, 2002 | 07:43 PM
  #3  
Ni5mo180SX's Avatar
White Comet
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 2,145
Likes: 0
From: Orange County
Seems that at 7600 7700 on the S4 theres a soft rev limiter kicking in.
Reply
Old Oct 27, 2002 | 08:16 PM
  #4  
MtnRacer's Avatar
infini guru
Tenured Member 15 Years
 
Joined: Nov 2001
Posts: 1,183
Likes: 0
From: Sunnyvale, CA
Reving higher will not make you go faster, you need more airflow to do that, and the stock ports are designed for max airflow at around your peak HP. You can help the engine breathe better(ie better airflow) by removing backpressure and unrestricting your intake with a catback and a cone filter. Or you can port the engine. You can also adjust the timing of the spark ignition with a an EMS. Those are your options.

Steve
Reply
Old Oct 27, 2002 | 08:22 PM
  #5  
Rs4Racer's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 422
Likes: 0
From: Washington
So lets say I wanted to rev up to 10k what would be needed to rev that high reliable?

.... I should probable just search huh?
Reply
Old Oct 27, 2002 | 08:36 PM
  #6  
Rotorific's Avatar
I dont know a damn thing
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2001
Posts: 1,703
Likes: 1
From: Evans, Ga
there is a rev limiter its called fuel cut at 7800 rpms you need to search becuase there was just a post on this a week ago...
Reply
Old Oct 27, 2002 | 08:46 PM
  #7  
drago86's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Oct 2002
Posts: 1,165
Likes: 0
From: California, Bay Area
rs4 lotsa stuff, looser bearing clerances, screw locked rotor/statonar gear bearings, hardend statonary gears, side clearencing, up the oil pressure, something lighter than the stock seals, which would either be ceramic, or more realistically carbon seals, lighter rotors would help too. theres prolly more, but i cant think right now. Id improve the stock oil squirters too, and do the water jacket mod. o, and a port that would breathe their, which is either PP or a large bridge
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
Nov 18, 2015 08:41 AM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Rotafuzz
New Member RX-7 Technical
3
Sep 30, 2015 09:55 AM
dexter snoek
New Member RX-7 Technical
4
Sep 29, 2015 09:18 AM
baix2
Power FC Forum
1
Sep 28, 2015 09:40 AM




All times are GMT -5. The time now is 01:32 PM.