Replacing turbo coolant feed line gasket
#1
Registered Rx7 Owner
Thread Starter
Join Date: Apr 2002
Location: Vancouver
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Replacing turbo coolant feed line gasket
Hey guys im just wondering how i go about replacing the coolant feed line gasket as shown in the picture
I see the two bolts there but im wondering will i have to replace all the coolant as well and will the line be able to move so i can replace the gasket or do i need to take the whole turbo off.
https://www.rx7club.com/attachment.p...hmentid=101340
the far left line going to the turbo
I see the two bolts there but im wondering will i have to replace all the coolant as well and will the line be able to move so i can replace the gasket or do i need to take the whole turbo off.
https://www.rx7club.com/attachment.p...hmentid=101340
the far left line going to the turbo
Last edited by marshp; 12-07-06 at 03:33 PM.
#3
#FakeCarEnthusaist
iTrader: (10)
you do not need to remove the turbo to replace the coolant feedline, but you do need to drain you coolant before you do it. Otherwise there will be alot of coolant dripping down.
Also the line is able to move slightly to put in new gasket. Otherwise unbolt the banjo bolt for the coolant line.
Also the line is able to move slightly to put in new gasket. Otherwise unbolt the banjo bolt for the coolant line.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
3
08-14-15 02:00 PM