Removing wiper switch..( WISH SEARCH FUNCTION WORKED ALREADY!)
Without thr risk of breaking anything..what must be done to remove the wiper switch controls from dash?
Got a new one to replace..
thanx...
Got a new one to replace..
thanx...
Remove the black cluster bezel/cover.
Three screws across the top, two on the corners from the underside.
Remove 4 screws from the steering column cover. remove the upper steering column cover.
Slide out the cluster cover/bezel an inch or two, unplug two plugs from the back of the headlight switch area, unplug two plugs from the back of the wiper switch area.
Carefully slide the cluster cover/bezel up between the steering wheel (in its lowest position if you have tilt) and the dash pad.
Three or four screws then hold the wiper switch in.
Three screws across the top, two on the corners from the underside.
Remove 4 screws from the steering column cover. remove the upper steering column cover.
Slide out the cluster cover/bezel an inch or two, unplug two plugs from the back of the headlight switch area, unplug two plugs from the back of the wiper switch area.
Carefully slide the cluster cover/bezel up between the steering wheel (in its lowest position if you have tilt) and the dash pad.
Three or four screws then hold the wiper switch in.
Last edited by Icemark; Mar 16, 2002 at 03:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post




