Removing rusty brake dust from paint????
Thread Starter
I came, I saw, I boosted.
Joined: Apr 2001
Posts: 1,921
Likes: 0
From: Windsor, Ontario, Canada
Removing rusty brake dust from paint????
Any suggestions???
A while ago I wore right through my drivers side front brake pad and started digging into the rotor.. Long story, not going to explain, but I already hada a new rotor waiting to go on.
Problem- My front dirvers side is now covered in rust/metal particles in the paint- like fallout.
Any idea how to get it off?? It's actually a very visable layer in some spots, like the drivers fender lip. I tried a 2000 grit wetsand in one inconspicuous spot, which easily took it off, but even after buffing that spot finishing with scratch remover, there is still a tiny haze... no WAY I am doing the side of my car like that!!
Options??? Clay bar?? CLR maybe???
Thanks!
A while ago I wore right through my drivers side front brake pad and started digging into the rotor.. Long story, not going to explain, but I already hada a new rotor waiting to go on.
Problem- My front dirvers side is now covered in rust/metal particles in the paint- like fallout.
Any idea how to get it off?? It's actually a very visable layer in some spots, like the drivers fender lip. I tried a 2000 grit wetsand in one inconspicuous spot, which easily took it off, but even after buffing that spot finishing with scratch remover, there is still a tiny haze... no WAY I am doing the side of my car like that!!
Options??? Clay bar?? CLR maybe???
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
