Removing front cover...
#1
This is my social media.
Thread Starter
iTrader: (22)
Join Date: Jan 2006
Location: WA
Posts: 2,744
Likes: 0
Received 0 Likes
on
0 Posts
Removing front cover...
I need to be super careful when removing the front cover right? Any advice? I don't know if there is any advice for this... or how hard it is. Just wondering.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
It's a bit of a pain. I assume you have read the Mazdatrix FAQ on the front torrington bearings? That's about the only danger in removing the cover. Keep the clutch depressed during the entire procedure.
The front nut can be a real pain to remove. It's torqued to 90 ft-lbs and will be Loctited in place. You'll need a big impact gun or a large breaker bar and a 19MM socket.
Other then that, it's fairly straightforward.
The front nut can be a real pain to remove. It's torqued to 90 ft-lbs and will be Loctited in place. You'll need a big impact gun or a large breaker bar and a 19MM socket.
Other then that, it's fairly straightforward.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM