i searched and maybe i don't understand without a pic or 2 but what do i do with these 2 vac lines.
88 na no cats no air pump
thanks
robert

 

Interesting block-off plate...

Cap the metal lines and tee the pressure sensor line into the BOV line like this:



EDIT: Oops, NA, no BOV! You get the idea.

 

stupid RHD, I did a double take when I saw that pic

Matt

 

ok
i don't understand .... where are those 3 metal vac lines i don't see them on my car. as in the pic i only see 2 rubber ones. i took off the actuators and blocked off those holes but don't see any other lines. only the 2 i highlighted in the pic.
thanks for the help so far
robert

 

Follow the rubber lines back to the metal lines and cap them there. You mean the aux port actuators? Why? Have you removed the sleeves?

 

I wired open the ports. from what i read if you wire them open i don't need the actuators. is this not right?????
just trying to get rid of stuff i don't need. this is a track only car. so i'm trying to get proformance and light weight. my 5 and 6 ports were stuck closed and i freed them and read that i could wire them open and remove the actuators so i made block off plates and the 2 vac lines had me confused as the pics i've seen had metal lines like the pic at top but my car only has those 2 rubber lines.
thanks
robert

 

Man i did too when i saw that master cylinder