recomendations for revtII exhaust onto NA
06-12-09, 08:22 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Lake Arrowhead Ca
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
recomendations for revtII exhaust onto NA
I have a close to perfect condition racing beat exhaust system for a turbo model rx7. It is the model with the 3in OD presilencer. I no longer have a turbo rx7 and want to connect it to the Na I am building. The pre silencer needs to connect to a racing beat collected header.
-is there a different pre silencer that racing beat sells which would be the correct length that I could have a new flange welded on.
-should I have a exhaust shop mangle either the header or revtII pre-silencer to make everything work.
- I would rather not go through the hassle of selling and then buying a NA system.
-is there a different pre silencer that racing beat sells which would be the correct length that I could have a new flange welded on.
-should I have a exhaust shop mangle either the header or revtII pre-silencer to make everything work.
- I would rather not go through the hassle of selling and then buying a NA system.
06-12-09, 09:58 PM
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
The header Won't match up to the TII Presilencer anyways.it is Off to one side a bit.(mine was).
My Suggestion is to Make a Pipe that will join the Header to the Catback..(put a Presilencer of Some Type in there).that way you don't Wreck parts.and you can save the TII presilencer for WHEN you do a SWAP!(or BUY a TII!)..
Btw,I have "A" 2.5 inch presilencer Mated to the 3 Inch RevII exhaust(Pacesetter header).I just used some Extra gaskets.It works.
My Suggestion is to Make a Pipe that will join the Header to the Catback..(put a Presilencer of Some Type in there).that way you don't Wreck parts.and you can save the TII presilencer for WHEN you do a SWAP!(or BUY a TII!)..
Btw,I have "A" 2.5 inch presilencer Mated to the 3 Inch RevII exhaust(Pacesetter header).I just used some Extra gaskets.It works.
Thread
Thread Starter
Forum
Replies
Last Post