2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Reason for not running..

Thread Tools
 
Search this Thread
 
Old Jul 11, 2005 | 08:53 PM
  #1  
BuGS's Avatar
Thread Starter
Turbo Mazda MX-3 Owner
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 247
Likes: 0
From: East Wenatchee, WA
Reason for not running..

Hey, recently got a 86 Base for $50 cause the guy that had it knew nothing and his dad wanted it gone. So got it home and discovered it had the wrong plugs. Finally got them out and they were fouled real bad. Could that possibly be a reason for it not to run? The guy said the only way he even got it to fire was by spraying carb cleaner in the air intake which to me might mean that it cleaned the spark plugs for a sec until they got fouled with Fuel again.

Anyways, besides replaceing the plugs and getting some more coolant in the system should I do anything else before starting it up? It has been sitting for at least 1 1/2 yrs.
Reply
Old Jul 12, 2005 | 10:39 AM
  #2  
BuGS's Avatar
Thread Starter
Turbo Mazda MX-3 Owner
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 247
Likes: 0
From: East Wenatchee, WA
anyone??
Reply
Old Jul 12, 2005 | 10:45 AM
  #3  
Houstonderk's Avatar
My girl
Tenured Member 15 Years
iTrader: (3)
 
Joined: Apr 2004
Posts: 2,173
Likes: 3
From: Andrews AFB, MD
There are maintenance procedures in the archive section for alot of problems. Fouled plugs will not start an engine and there is an unflooding procedure in the archive as well.
Reply
Old Jul 12, 2005 | 11:04 AM
  #4  
rs_1101's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2004
Posts: 1,088
Likes: 0
From: OC
change all fluids and plugs.. add new gas if possible. keep in mind it may be flooded due to an old low compression (or blown) motor.
Reply
Old Jul 12, 2005 | 12:59 PM
  #5  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
I've posted the proceedures for starting a "storage" car several times. Should be able to find them by searching my name and "storage".

But a quick run down:

-drail and replace ALL fluids
-replace ALL belts and hoses
-replace ALL filters (oil, fuel, air)
-do ALL procedures listed in 60K tuneup
-put about an ounce of oil through each leading (lower) spark plug hole, rotate engine by hand a few times, then repeat
-start car, pay careful attention to gauges, follow normal breaking procedures for the next few hundred miles
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
Jan 25, 2024 03:34 AM
23Racer
Canadian Forum
13
Nov 25, 2018 04:44 PM




All times are GMT -5. The time now is 05:30 PM.