RB presilencer W/CS full exhaust?
#2
Tear you apart
iTrader: (10)
It won't unless you modify some things ;o. Check:
http://www.racingbeat.com for lengths of the presilencer and check with http://www.corksport.com for their length of their downpipe. If it fits into the stock cat (the downpipe that is). You could have a shop cut the pipe, weld in a flange, and fit in the presilencer. Shouldn't be so hard.
http://www.racingbeat.com for lengths of the presilencer and check with http://www.corksport.com for their length of their downpipe. If it fits into the stock cat (the downpipe that is). You could have a shop cut the pipe, weld in a flange, and fit in the presilencer. Shouldn't be so hard.
#3
Senior Member
iTrader: (6)
Join Date: Oct 2003
Location: Elkin, NC
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Why would you want to put a RB presilencer on if you are going to put the full turbo back exhaust from CS on...it comes with a midpipe....I mean it will just as quiet just b/c you are turboed..I have heard it and my header/presilencer to CS is much louder of course.
#4
Full Member
Thread Starter
Join Date: Aug 2003
Location: Auburn, Washington
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Well I already have the full CS turbo back exhaust and it is EXTREMELY loud. It's a true off-road only exhaust. I'm just trying to quiet things down a bit.
#5
Major RX-7 Withdrawals
Join Date: Mar 2002
Location: Moreno Valley, CA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
The pre silencer won't quiet it down. It will probably just give the exhaust a deeper tone. I have a RB 3" DP to RB presilencer to the CS 3" catback and it is still loud as hell. The only way I quiet it down is by using corksports silencer that goes in the end of the exhaust.
Thread
Thread Starter
Forum
Replies
Last Post