Raybrig NSX style sleek light for FC
11-30-04, 08:02 PM
#1
Raybrig NSX style sleek light for FC
Well I decided to get a start on my sleek light kit and I had these lights around so I decided to do this for the prototype and when I have some more money I will include some different lioghts using an H1 bulb. These lights use an H3 and are a single horizontal unit. The pics are extremely horrible and not much can be seen at all really until tomorow but I wanted to know what you guys thought from opinions from the NSX car...
Anyhow I made the thing and have the housing painted and the lexan set to how I want it to be. If there is any interest for this I can make some more however this was not the intended project.
Almost impossible to see, I know.....wait til the morning....
Anyhow I made the thing and have the housing painted and the lexan set to how I want it to be. If there is any interest for this I can make some more however this was not the intended project.
Almost impossible to see, I know.....wait til the morning....
Trending Topics
11-30-04, 10:12 PM
#9
Rattle can retard
Join Date: Jul 2001
Location: St. Peters, MO
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
btw i'll go ahead and ask the two most important questions
1. How good is the lighting? Comparable to stock?
2. How much cost if you were to make them for someone?
1. How good is the lighting? Comparable to stock?
2. How much cost if you were to make them for someone?
11-30-04, 10:23 PM
#11
(_8(|)
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Karack
youre the screwy one, the second is a photoshop pic... 
lol, i like the screwy eyes!
ahhaha i like that one also, i deticate it to you guys
11-30-04, 10:28 PM
#12
on this one in particular it is an h3 bulb so probably less than stock....we will have to see, and with my full on setup it will have full on DOT approved H1's but will be different and more expensive, probably around in the 450 range which is still much less than others. I am only going to ask for 250 for these so I can make a mold and start offering more if anyone wants and make the others I want along with my other projects...
12-01-04, 10:34 AM
#13
Rattle can retard
Join Date: Jul 2001
Location: St. Peters, MO
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
bumpity to gain more interest before the pictures
and I didn't say anything about it being photoshop or not, I was just clarifying because 2 of 4 individuals replying made a reference to his sig
and I didn't say anything about it being photoshop or not, I was just clarifying because 2 of 4 individuals replying made a reference to his sig
12-01-04, 10:49 AM
#15
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Ya know.. I thought about getting sleek headlight conversions.. then i thought, if i took the pop-ups off.. i'd never be able to judge the distance between my passenger fender and the tool boxes as i oull my 7 into a two car garage with three cars in it....... (only for the winter)
12-01-04, 12:43 PM
#19
Full Member
Join Date: Sep 2004
Location: Ohio
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Must see good pics. See i thought about trying th 300ZX lights in it but as i cant find any at junk yards around here im waiting for some one to wreck kinda bad to say but ya know.
12-01-04, 12:46 PM
#20
Full Member
Join Date: Apr 2004
Location: Above the core
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cybertrip
Must see good pics. See i thought about trying th 300ZX lights in it but as i cant find any at junk yards around here im waiting for some one to wreck kinda bad to say but ya know.
