Ran My Fc Into A Ditch! Please Help!
12-05-06, 11:13 PM
#1
Newbie
Thread Starter
Join Date: Mar 2006
Location: Beach Cities
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ran My Fc Into A Ditch! Please Help!
Hey guys I slid my car into a big *** ditch. And now the right rear wheel is camber inward. the toe angle is fine. How can i fix this problem? Change rear subframe? or is there a way to get it aligned? Please help I feel sorry for her. - Richard.
12-05-06, 11:53 PM
#2
Ooooooh, custom.
Join Date: Oct 2006
Location: Corona, CA
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Im going to be the first to say this, and please dont take it as a flame...not how its intended.
Why in the hell were you sliding your car near ditches? Pick a spot that is more flat...
That aside, you could probably ask around (americas tire) and see what they would recomend and get an estimate.
Why in the hell were you sliding your car near ditches? Pick a spot that is more flat...
That aside, you could probably ask around (americas tire) and see what they would recomend and get an estimate.
12-06-06, 07:50 PM
#3
Newbie
Join Date: Sep 2003
Location: Raleigh, NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem with my vert when i got it, my back drivers side tire had screwed up camber. You will have to get it checked out and replaced, there isn't a way to align it. My tie rod was bent really bad and my lower control arm was only bent about a degree, but it was enough with the bent tie rod to throw the tire out there.
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
