I have a few simple questions. I saw the FSM and since i have an ohmometer ( i guess thats what its called) i thought i'd check to see if adjustment is needed;
(btw, idle is bad, but when i turn the ac on it evens out)

How do i get the harness from the TPS off without breaking it..its a weird one.

Do i test it w/ the keys in the ON position?

Do i test the part that touches the intake manifold, or coming from the wiring harness?

Should i set it so the resistance is in the middle of the FSM specs?

and finally;
The sensor above is the high and the one below is the low right?

Thanks

Jeff

 

Go to this link, there are pictures and instructions, also to remove the connection, pinch the coupler and pull:

http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html

good luck jeff

 

there are two on the NA models. One is black, orange and green, the other is yellow, red, and blue and goes into a 6 peg harness..thats why i got confused. but that site answered a lot of questions..thanks!