quicky on TPS adjustment (need answer asap)
I have a few simple questions. I saw the FSM and since i have an ohmometer ( i guess thats what its called) i thought i'd check to see if adjustment is needed;
(btw, idle is bad, but when i turn the ac on it evens out) How do i get the harness from the TPS off without breaking it..its a weird one. Do i test it w/ the keys in the ON position? Do i test the part that touches the intake manifold, or coming from the wiring harness? Should i set it so the resistance is in the middle of the FSM specs? and finally; The sensor above is the high and the one below is the low right? Thanks :) Jeff |
Go to this link
Go to this link, there are pictures and instructions, also to remove the connection, pinch the coupler and pull:
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html good luck jeff |
there are two on the NA models. One is black, orange and green, the other is yellow, red, and blue and goes into a 6 peg harness..thats why i got confused. but that site answered a lot of questions..thanks!
|
All times are GMT -5. The time now is 08:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands