quick throttle body question
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2003
Location: fl
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
quick throttle body question
im in the middle of doing the tb mod on my s5 na and i relized that the secondaries are not completely open once the throttle cam has moved through all of its travel. i can still push them about another 1/8 of an inch toward paralel with my fingers after the throttle is fully rotated. is this normal. is there something i need to adjust/fix.
thanks in advance.
thanks in advance.
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Not a problem.
You are so close that altering the linkage would not be worth the trouble.
The stock TB is actually bigger than it has to be.
I have seen a >1000HP drag version 13B using a stock TB that was only slightly modified.
You are so close that altering the linkage would not be worth the trouble.
The stock TB is actually bigger than it has to be.
I have seen a >1000HP drag version 13B using a stock TB that was only slightly modified.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM