Quick Help I Need To Get Back To Work!!!
#1
Full Member
Thread Starter
Join Date: Jun 2008
Location: Milpitas
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Quick Help I Need To Get Back To Work!!!
ok so my car was starting and running fine about 1 1/2 hours ago great idle no lag during acceleration starting perfectly... but now all it does is crank and while cranking it shoots coolant all over the ******* place.. i cleaned all the electrical connections with some connector cleaner **** and everything is dry.. its still not starting what the hell is wrong why would it all of a sudden do this.. PLEASE HELP IM REALLY LATE FOR WORK
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Your gonna be REALLY late for work..you have to Fix the Coolant leak,,and from the Sounds of it,you have a Blown Coolant Seal(engine Rebuild time)..need more info..where is the coolant Coming from?
#3
Full Member
Thread Starter
Join Date: Jun 2008
Location: Milpitas
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
the coolant is coming from the filler cap into the overflow tank i know my coolant seals are bad and ive been replacing coolant so i can keep it running just until i have enough for a rebuild and its been fine until now....
#6
Full Member
Thread Starter
Join Date: Jun 2008
Location: Milpitas
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
hmm this morning i went out and started it.. quite a bit of white smoke came out and when it stopped i turned it off and later i put new coolant in and its running fine again except that i need to put a little bit of coolant in every 2-3 days...
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM