Question on power window install
#1
Full Member
Thread Starter
Join Date: Oct 2004
Location: Long Beach
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Question on power window install
I have searched this to death and I have found nothing but parts lists, the regulators and the switches. Ok I am doing this on an 86 base...question....I have everything needed for the manual window to power window install...the question is...since the car doesnt have power anything and has no harness from the fuse box to both sides I need to get power to the motors and switches.....I can run ignition or continous power to the fuse box but from there where would it go? does the power wire run to the switch and then to the motor or what? whats color wire gets ground...pretty much i need to know it like this for both sides
Fuse box--->driverside motor---->continuous power(red)------>switch and so on
----->ground(green)
I dont know what wire colors are what...the motors have a red with black stripe wire and a green wire and the switches have different color wires.
Fuse box--->driverside motor---->continuous power(red)------>switch and so on
----->ground(green)
I dont know what wire colors are what...the motors have a red with black stripe wire and a green wire and the switches have different color wires.