question about wiring on my 87TII
question about wiring on my 87TII
i put the wireing harness in and i have one plug left over and have no idea wher it plugs in or if it plugs in at all, its rectangle with like 13 wires on it and two of the wires are black with yellow. can anyone tell me where they go, my friend said they might be for an automatic. thanks
13 pins/sockets? And a black/yellow wire. YOu better find a home for it if it has a black/yellow wire.
You really NEED to give a better location of the plug. Just inside the car on the passenger side??????
You really NEED to give a better location of the plug. Just inside the car on the passenger side??????
You talking by the ECU or up in the kickpanel?
If it's up in the kickpanel, that needs to be plugged in - it's a crossover harness for the dash, etc.
If it's for the ECU, it'll be obvious that the ECU is missing a plug...
-Ted
If it's up in the kickpanel, that needs to be plugged in - it's a crossover harness for the dash, etc.
If it's for the ECU, it'll be obvious that the ECU is missing a plug...
-Ted
There's a thirteen pin connector on the EMISSIONS harness that connects to the FRONT harness. It has a black/yellow wire. It's the second wire from one end.
It provides power to misc items like the fuel injectors, power to all the solenoids, power to the ECU on 3J etc. Nothing too important to worry about.
It provides power to misc items like the fuel injectors, power to all the solenoids, power to the ECU on 3J etc. Nothing too important to worry about.
there is that one left unplugged then there is another big plug just like it that is plugged into the dash or whatever. it is located on the passenger side kick panel. i think it doesnt go to anything, it has 2 wires that are black and yellow not just one black and yellow one
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM



