question about my turbo set up......
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: new hampshire, middleton(a town so small we have no conveince stores)
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
question about my turbo set up......
ok im unpgrading my entire turbo system, the things i know for sure are a hks cast manifold, 35mm wastegate(vented to the outside), a spearco fmic, with 2.5 inch piping the only problem im having is which turbo will be the best for my set up, also in the near future i will be getting a rebuild with a very agressive streetport
alot of people have said the t04e but the t3/60-1 has a high lb/min rating, im am very lost any help is welcome
these are the 2 im stuck between----
to4e
Fitted with a .57 trim T04E compressor (48lb/min) and .60 trim T04E compressor housing. The turbine side features the very efficient .76 trim Stg. 3 T3 turbine wheel and a high flow TA31 turbine housing.
or
t3/60-1
Fitted with a 60-1 compressor (65lb/min) and .70 trim T04S/60-1 compressor housing. The turbine side features the very efficient .76 trim Stg. 3 T3 turbine wheel and a high flow TA31 turbine housing.
alot of people have said the t04e but the t3/60-1 has a high lb/min rating, im am very lost any help is welcome
these are the 2 im stuck between----
to4e
Fitted with a .57 trim T04E compressor (48lb/min) and .60 trim T04E compressor housing. The turbine side features the very efficient .76 trim Stg. 3 T3 turbine wheel and a high flow TA31 turbine housing.
or
t3/60-1
Fitted with a 60-1 compressor (65lb/min) and .70 trim T04S/60-1 compressor housing. The turbine side features the very efficient .76 trim Stg. 3 T3 turbine wheel and a high flow TA31 turbine housing.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM