Question about exhaust work priceing
#1
Throbbing Member
Thread Starter
Join Date: Feb 2004
Location: Cincinnati, OH
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Question about exhaust work priceing
well ive had an entire exhaust system sitting in my garage since xmas and i want to get this puppy hooked up. ive tried geting the bolts off my car myself but i dont have the right tools. anyone know about how much its cost to take it to an exhaust shop have them bolt it up?
is the RB downpipe, presilencer, ypipe to 2 ebay mufflers that need to be welded up.
thx
is the RB downpipe, presilencer, ypipe to 2 ebay mufflers that need to be welded up.
thx
#2
King of the Loop
probably round $100. It cost $250 for me to get the cat removed and replaced with a presilencer, and then 2 ebay mufflers welded on. I also got the catback replaced with new pipes since they were rusty ****. Botling on should cost less.
#3
~*Serendipity*~
Join Date: Dec 2003
Location: New Jersey
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
I had also thought about going to an exhaust shop to get the work done. I didn't have the right tools, was too weak, bolts were seized, etc. But after a while of working on it, we (me, aznpoopy, Torean, and Rrichutt) managed to get the exhaust off. Keep working at it. Nothing like the feeling of accomplishment to brighten your day.
If you're really serious about going to a shop, then tops $250 around here...
If you're really serious about going to a shop, then tops $250 around here...
#4
I rolled down a mountian
Join Date: Mar 2003
Location: garden grove, california
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
go rent an impact wrench + socket... its so worth it.
with an old exhaust system, the nut could be froze on the stud, then you'd just unscrew the nut+stud out of the main converter. a shop could handle a variety of problems that could arise.
to the original poster: the ypipe to the ebay mufflers are the only things that need to be welded, right? just go to a weld shop, or a muff shop.
the rb header to rb presilencer to ypipe all bolt up.
your using a NEW ypipe to weld on, right?
--mike
with an old exhaust system, the nut could be froze on the stud, then you'd just unscrew the nut+stud out of the main converter. a shop could handle a variety of problems that could arise.
to the original poster: the ypipe to the ebay mufflers are the only things that need to be welded, right? just go to a weld shop, or a muff shop.
the rb header to rb presilencer to ypipe all bolt up.
your using a NEW ypipe to weld on, right?
--mike
Thread
Thread Starter
Forum
Replies
Last Post
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM