2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Pulled My Dash Now Fc Wont Crank!!

Thread Tools
 
Search this Thread
 
Old Mar 30, 2008 | 01:02 PM
  #1  
TOOSHORT_88's Avatar
Thread Starter
"On the grind"
Tenured Member: 20 Years
Liked
iTrader: (15)
 
Joined: Jan 2005
Posts: 1,374
Likes: 42
From: everywhere
WA Pulled My Dash Now Fc Wont Crank!!

I pulled my dash and wen i got it all back together my car will not crank. I have power and i can hear the fuel pump come on , but she just wont crank..

I noticed that there is a short wire with black and reg stripes on it that had broken from another connecter under the dash area. I used a jumper wire to connect the two again but still nothing...

On my other fc i disconnected that black and red wire from the connecter under the dash and it makes it so it does not crank...

Im not 100% sure its the black and red wire because i used jumper wire to connect the break in it..

Any idea what it could be...
Reply
Old Mar 30, 2008 | 01:49 PM
  #2  
Osirus9's Avatar
Jackstand Drifter
Tenured Member 05 Years
iTrader: (10)
 
Joined: Dec 2006
Posts: 1,065
Likes: 1
From: Chicago, IL
is it part of the ignition next to the steering column? there are a lot of black and red wires under the dash, pics would be helpful
Reply
Old Mar 31, 2008 | 06:33 PM
  #3  
TOOSHORT_88's Avatar
Thread Starter
"On the grind"
Tenured Member: 20 Years
Liked
iTrader: (15)
 
Joined: Jan 2005
Posts: 1,374
Likes: 42
From: everywhere
ya it has to be part of the ignition..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 04:15 PM.