ps + ac belt removal?
07-24-12, 03:46 PM
#1
Senior Member
Thread Starter
ps + ac belt removal?
I thought i loosened the tensioner nuts, if its the 2 on top of the ps idk. It wont move what am i missing? I need to get these belts off so i can add a belt to my alternator.
07-25-12, 07:21 AM
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
10 mm tensioer nut at the top of the assembly.Then loosen the 17mm nut on the idler pulley.
The tension of the belt should loosen the pulley up.
The tension of the belt should loosen the pulley up.
07-25-12, 04:15 PM
#5
Senior Member
iTrader: (3)
Join Date: Oct 2008
Location: Glenwood, Iowa
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
Yea, I snapped the head off the 10mm AC bolt, but the 17mm was tight enough it didn't move and I don't use/have AC anyways so I don't worry, I eventually did replace that long f***er. Took forever with pliers.
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM
