problems with s4/s5 motor
04-22-07, 02:06 PM
#1
Pushrods
Thread Starter
Join Date: Nov 2006
Location: kennewick, wa
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
problems with s4/s5 motor
were trying to put an s4 motor with an s5 tb, with an s5 harness and n351 ecu. well its all in and everything but its not running right, it cuts out under any heavy throttle. itll get to 6000 and wont rev any higher, itll cut out anytime you hit the gasd no matter what rpm its at. it idles fine just has problems accelerating. is there something were missing here??
:edit: when its given full throttle from idle or anywhere itll rev then cut out, and backfire through the intake. well try to get a vid of it later, were going over the harness right not to check, again, to see if anything is unplugged. when we pull the motor from the s4 car it ran perfect. were stumped.
:edit: when its given full throttle from idle or anywhere itll rev then cut out, and backfire through the intake. well try to get a vid of it later, were going over the harness right not to check, again, to see if anything is unplugged. when we pull the motor from the s4 car it ran perfect. were stumped.
Last edited by sidewayz_FC; 04-22-07 at 02:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
82streetracer
Haltech Forum
11
03-11-19 05:34 PM