Problem with resetting ECU
#1
Full Member
Thread Starter
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Problem with resetting ECU
I've got a problem with resetting my ECU, guys.
Step 1: Pull negative battery terminal
Step 2: step on brake pedal until count of 30
Step 3: UNplugged ECU from EFI harness
Step 4: Reconnect everything in reverse order
Step 5: Turn ignition to the "ON" position
Step 6: WEEP when I see all the same codes flashing and I haven't even started the car.
THE CODES: pressure sensor, and all three solenoid codes
Could this be a ground problem, or perhaps a fuse??
thanks
Mike
Step 1: Pull negative battery terminal
Step 2: step on brake pedal until count of 30
Step 3: UNplugged ECU from EFI harness
Step 4: Reconnect everything in reverse order
Step 5: Turn ignition to the "ON" position
Step 6: WEEP when I see all the same codes flashing and I haven't even started the car.
THE CODES: pressure sensor, and all three solenoid codes
Could this be a ground problem, or perhaps a fuse??
thanks
Mike
#3
Full Member
Thread Starter
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
I don't think so, the ECU is new reman. I discovered a funny thing today. The headlights trigger the ECU codes!! In the daytime I don't get anything, but as soon as I have to turn my headlights on I get the codes!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM