Pressure Conversion Question
#1
omae mo na!
Thread Starter
Join Date: Nov 2004
Location: NEW JERSEY
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Pressure Conversion Question
ok my s5 turbo reads -20psi on my defi boost gauge at idle.
i just installed my hks evc 4, and its telling me approx. -.64 at idle.
doing the conversion with this calculator: http://home.online.no/~helgnil/calc3_4e.html
i get that -.64 bar = -9.2 psi
am i reading it wrong? is it not BAR? the boost gauge is on the same nipple as the evc, so i know they are reading the same #'s...
its not calibrated wrong or anything because engine off, boost gauge reads 0 and evc reads 0.0
i just installed my hks evc 4, and its telling me approx. -.64 at idle.
doing the conversion with this calculator: http://home.online.no/~helgnil/calc3_4e.html
i get that -.64 bar = -9.2 psi
am i reading it wrong? is it not BAR? the boost gauge is on the same nipple as the evc, so i know they are reading the same #'s...
its not calibrated wrong or anything because engine off, boost gauge reads 0 and evc reads 0.0
Last edited by sleejay; 01-04-06 at 06:37 PM.
#3
What's the point??
iTrader: (6)
Join Date: Oct 2005
Location: Omaha, NE
Posts: 995
Likes: 0
Received 0 Likes
on
0 Posts
bar is correct, however the other measurement most likely is inches of mercury since using this, http://www.convert-me.com/en/convert/pressure , -20 in. Hg is about -.67 bar which is most likely well within the allowed % error of the instruments
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM