Powersteering electrical connection -- where does it go???
09-07-02, 04:12 PM
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Pasadena, CA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Powersteering electrical connection -- where does it go???
I'm almost done putting a fresh rebuild back in my 1991 NA, and was wondering where the electrical connection for the powersteering is? I have a ~1 foot long wire with a plug on it leading out of the power steering pump, but I can't find the plug for it on the electrical harness. Can anybody tell me where that is?
Thanks!,
Andrew
Thanks!,
Andrew
09-08-02, 10:17 AM
#3
Full Member
Join Date: Mar 2001
Location: Ann Arbor, MI, USA
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Mine has two connectors. The first, which comes out the top, goes to a connector by the fusebox/shock tower. The second, which comes out the bottom of the pump, goes over by the leading coils, in between the shock tower and the headlight (but at some point along the line my P/S was replaced by a unit that was the wrong kind, so the connector doesnt fit (so my ecu never knows when I'm turning the wheel...oh well)). Should be about the same for you. I routed the footlong wire around behind the pump and then to the fusebox because I didnt want it getting knowcked around. Good Luck
Eric
Eric
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
88, 90, 94, conection, connection, connectors, electric, electrical, power, pump, rx7, steering, wiring
