chinkst3r

iTrader: (5)

i know how your supposed to get the motor out, lower window and unbolt window then unbolt motor and track, but heres my problem.

i already pulled all the wiring out of the car, and i still need to remove the window and motor. any clue how to do this?

im thinking that i can just unbolt the glass from the track, but i dont know how i would be able to remove glass from the door considering its fully closed and wedged into the upper seals...

311unity13B

just touch 2 leads off of a 12v battery to the motor and it will move, either up or down, switch the polarity and it will go the opposite way

fonzi581

iTrader: (1)

Ur trying to remove the glass and window tracks? Its all pretty easy but ive done it too many times. The glass is connected to a bracket that connects to the window track. If u lower the window it makes it a lot easier to reach behind it and unscrew it. After those 2 bolts r off then u can just wiggle the window out. Make sure it goes up the tracks straight but it takes a lil wiggling after that. As far as the window tracks go, just unbolt them and pull it out the biggest hole in the door. Its not too difficult. Hope this helps.

chinkst3r

iTrader: (5)

i'll have to try that this weekend... didnt think it was that simple LOL oh well, thanks!

haha, it did help, but my biggest concern was moving the window down without power going to them. but thanks, ima have to pull the glass out anyways! LOL

fonzi581

iTrader: (1)

Glad i could help. But yea with the window all the way up its a really tight fit to get the glass out but it cant be done. Good luck