Power Steering To Manual Rack Issue.
#1
Power Steering To Manual Rack Issue.
So my p/s rack started to puke fluid through the rack so I decided to install a manual rack laying around that I purchased through here several years ago. Im in the process of installing it and I ran into an issue were on the passenger side area of the rack the mounting is loose/have excessive play due to the manual rack is way thinner. Anyone ran into this issue b4?
The following users liked this post:
R-X-R (10-10-19)
#3
Rotary Enthusiast
Right hand side of manual rack is smaller than power rack. Like scathcart said, bushing/bracket is NLA from Mazda. There have been posts on this subject before. Most people either fab a new bracket or have bought a PU bushing from Energy Suspension that takes up the gap with the original bracket.
The following users liked this post:
R-X-R (10-10-19)
Thread
Thread Starter
Forum
Replies
Last Post
Silver Comet
2nd Generation Non-Technical and pictures
3
12-08-15 05:42 PM
kenny senter
2nd Generation Specific (1986-1992)
9
08-27-08 07:35 PM
rotorsownyou7
2nd Generation Specific (1986-1992)
19
07-16-06 07:15 PM
turbo-polak
2nd Generation Specific (1986-1992)
4
01-18-06 03:57 AM