power steering and air pump removal help?
Thread Starter
Full Member
Joined: Apr 2001
Posts: 224
Likes: 0
From: columbus,ohio,usa
power steering and air pump removal help?
Hey guys I wanna take of fmy power steering and my air pump on my 10th ann. and i was wondering how i can do all of that.
I know that i need a block off plate for the air pump to take that off. but i dont know which one. Also do i have to bypass the power steering some how....?
I know that i need a block off plate for the air pump to take that off. but i dont know which one. Also do i have to bypass the power steering some how....?
White Comet
Joined: Jan 2002
Posts: 2,145
Likes: 0
From: Orange County
The airpumps a little more straight forward then it seems. You can just remove the belt or go ahead and unbolt the airpump. Im not sure what the hose runs too on the T2 but im sure another forum member can help you out on that one...........
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Removing airpump: remove the pump, disconnect the hose and plug the nipple in the TID that the hose connects to. Also plug the hole in the block the airpump outlet hose connects to. Remove ACV valve and install blockoff plate.
Removing power steering: drain system, remove belt for pump, remove pump. Loop fluid feed and drain lines on rack to seal everything up. Remove power steering computer from under dash.
If you need more info, use the search function.
Removing power steering: drain system, remove belt for pump, remove pump. Loop fluid feed and drain lines on rack to seal everything up. Remove power steering computer from under dash.
If you need more info, use the search function.
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxCritter
2nd Generation Specific (1986-1992)
15
Jan 3, 2016 04:11 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
12abridgeport
1st Generation Specific (1979-1985)
2
Aug 17, 2015 06:28 PM
