Power locks wiring question, please advise!
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: South Wales
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Power locks wiring question, please advise!
I bought a remote central locking kit recently, and i need to hook up the wires to the power lock motor, 3 wires, one for go up, one for go down, and one for common, could you please advise me which and connector is it for the power lock motor on the driver side door (right hand side), also which wires are for which??
Please help, need immediately!!
Please help, need immediately!!
#2
Former Moderator. RIP Icemark.
There is not a motor in the drivers door.
Mazda uses a "Follow Me" system, which means that there is only a switch in the drivers door, and a motor in the passengers door.
If you wanted to add remote control locking, you would need to add a power door lock motor/ actuator into the drivers door, and wire up a couple of relays to control it.
Mazda uses a "Follow Me" system, which means that there is only a switch in the drivers door, and a motor in the passengers door.
If you wanted to add remote control locking, you would need to add a power door lock motor/ actuator into the drivers door, and wire up a couple of relays to control it.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM