power door locks
#1
RE_p Rotors
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Newport News/Fredericksburg
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
power door locks
i got the Autolock remote door locking system a while back and want to use it not just let it sit around..now i understand you need to modify it because we do not have power door locking locks correct...talked to a guy and he was saying like bypass this and blah blah it will work but its not that easy...anyway as you guys can tell i dont know hardly anything on this subject so help a member out..tired of walking out in the cold and fidiling with the lock with my key..
#2
RE_p Rotors
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Newport News/Fredericksburg
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
the thread in 3rd gen is basically what im talking about..would it be the same basically for the fc...lik having to get the accuaters and relay switch?
#3
Former Moderator. RIP Icemark.
If your car has the factory power door lock, it has a "follow me" (type F) door locking system.
Too hook up an aftermarket keyless entry system, it requires putting a power door lock actuator into the drivers door on all RX-7's regardless of series.
If you don't have the factory power lock system at all, then it requires a door lock actuator to be installed in each door, and with some keyless entry systems, also to add power door lock relays.
Too hook up an aftermarket keyless entry system, it requires putting a power door lock actuator into the drivers door on all RX-7's regardless of series.
If you don't have the factory power lock system at all, then it requires a door lock actuator to be installed in each door, and with some keyless entry systems, also to add power door lock relays.