power antenna replacement for 2nd gen
#1
Full Member
Thread Starter
Join Date: Jun 2002
Location: Chicago North suburbs
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
power antenna replacement for 2nd gen
Just had to post this. My power antenna was all mess up. Motor and mast were broken. Also I put in an after maket radio. Which mean I would had to install the relay switch for it did work. Well, I found a mazda power antenna on ebay for 5 bucks. Found out it was from a late model 626. Change out the bottom braket and top mounting post. Figure out the wiring, and now I have a new power antenna. Plus, since it was from a late model mazda, I didn't need to install the relay switch.
If your power antenna is shot. (It more than replacing the mast.) Go find a last model mazda at the junk yard and use it instead. Cheap fix.
If your power antenna is shot. (It more than replacing the mast.) Go find a last model mazda at the junk yard and use it instead. Cheap fix.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM