Post Pics of your FMIC setup
Thread Starter
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
Originally Posted by YearsOfDecay
One word of advice.... there is one problem with mounting the IC like this.... it makes running an electric fan not a good idea if you have the stock bumber on the front...
the end tanks (mine are 3X8X3) take away about 48 square inches of duct space....
My black magic fan had a hard time pulling through the thicker Koyo rad AND the FMIC.. No prob with stock fan..n (in fact it runs a bit to cold in the winter..) but I'm working on making an aluminum underbelly pan to duct air in from under the FMIC and thus get more air to the rad with less restriction...... and I'll try the e-fan again.
the end tanks (mine are 3X8X3) take away about 48 square inches of duct space....
My black magic fan had a hard time pulling through the thicker Koyo rad AND the FMIC.. No prob with stock fan..n (in fact it runs a bit to cold in the winter..) but I'm working on making an aluminum underbelly pan to duct air in from under the FMIC and thus get more air to the rad with less restriction...... and I'll try the e-fan again.
Thanks Again
TwEaK
Thread
Thread Starter
Forum
Replies
Last Post
