is it possible to install a s4 short block into a s5 w/ the s5 manifolds etc.?
#1
Rotary Enthusiast
Thread Starter
Join Date: Nov 2003
Location: orlando, fl.
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
is it possible to install a s4 short block into a s5 w/ the s5 manifolds etc.?
so i have a xtra good s4 turbo short block and, a s5 turbo 2 with a bad block, i know that that you cant put the s4 long block into a s5 cause of the wiring diffrences, but can i bolt everything off the s5 onto the s4 shortblock, im thinking the only thing that i will have to change is the flywheel and clutch, has anybody ever done something like this?
thanx in advance for any info
thanx in advance for any info
#3
Rotary Enthusiast
Thread Starter
Join Date: Nov 2003
Location: orlando, fl.
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aesop Rock
isn't it the same thing? just different rotors and counter weight?
so everyhting will bolt right up, primary fuel rail, lim etc?
thanx
#6
**-P I drive a miata.
Join Date: Jul 2002
Location: albany, GA
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
the s5 intake manifold will not just "bolt on". look at the gaskets on mazdatrix's site and you will see what I mean. I am sure with a little drilling it will work, though.
#7
Full Member
Join Date: May 2004
Location: In hell hell till I get a layoff
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Yes it will work. i did it last week and the car runs strong all i need now is a tps. the mods you need to do are fill in the mouth at the bottom of the intake s5 and a new plug on the water temp sensor and plug up the mop and tie it down somewhere
BTW: its a n/t
BTW: its a n/t
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
4sfeedit
Canadian Forum
1
09-07-15 10:55 AM
4sfeedit
3rd Generation Specific (1993-2002)
10
08-16-15 01:42 PM