Is it Possible to for a 13b without turbo, supercharger or bridgeport to do 160mph??
05-21-10, 08:35 PM
#1
Full Member
Thread Starter
Is it Possible to for a 13b without turbo, supercharger or bridgeport to do 160mph??
My dream is to reach the end of my speedometer, and that's 160mph, just thought I would throw this question out there.
05-21-10, 08:53 PM
#3
Full Member
Thread Starter
RTR, haha, you gotta give me some hints bro! are we talking a fat porting job, and straight pipe exhaust along with performance intake, maybe a light weight flywheel?? or is there something else??
(
05-21-10, 09:23 PM
#6
Full Member
Thread Starter
don't worry about me killin myself, but i understand your responsible approach. 40 more miles per hour wont be anything too hard, i've youtube vids of 120, driving straight is driving straight my friend haha
Trending Topics
05-21-10, 10:47 PM
#8
89FC
Join Date: Mar 2010
Location: Bay Area, Cali.
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=ORh0xJV0y00
He was driving strait, didn't workout so well for him now did it.
He was driving strait, didn't workout so well for him now did it.
05-22-10, 03:47 AM
#13
Smells like 2 stroke.
Turn the 6pi into a large 4 port. Or go P-Port. I would want an aftermarket engine management system and a dyno though. You would most definitely need over 200hp and of course you would want the car lowered... I have only done around 125mph... And that was on a tired stock engine and stock suspension. 160mph is a tall order for an N/A car but it could be done. It just takes time, $$$, horsepower, a relatively safe place to do it, and some common aerodynamics (something that is almost already taken care of for you with the FC). If you plan on doing it on the streets, please make sure you are ready for the possible outcomes... Better yet, just don't even do it on the streets.
(P.S. front and rear splitters/diffusers/whatever you want to call 'em might help...)
(P.S. front and rear splitters/diffusers/whatever you want to call 'em might help...)
05-22-10, 12:32 PM
#15
PIMP
Join Date: Feb 2004
Location: Greensboro, NC
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
160 mph aint no walk in the park. My old 88 turbo II with 3" turbo back exhaust (and pretty much otherwise stock) did 148mph before it was maxed out. Anyways, don't do it, there is not much excitement to be gained when considering the risks your taking, may as well go autocrossing and have a lot more fun and what do you know, you'll be a lot safer doing so (hopefully
.
.
05-22-10, 12:46 PM
#16
brap-brap-brap
iTrader: (1)
Join Date: Mar 2004
Location: Los Angeles, CA
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
my 87 tii pegged the speedometer (160mph) and then some with nothing more than an intake and gutted cat. massive boost creep and very cold ambient temps. Even though I did it in a dry lake bed, in hindsight, I was young and stupid (8 years ago?).
1) Probably not as much of a thrill as you think it will be. It'll take a long time to get to speed and there's nothing to feel when accelerating so slowly.
2) Need a massive space to do it safely
3) Even if using a massive area, you probably wont have the proper safety personnel present (EMTs, fire, etc)
4) Its an rx7, take it for some twisty's. You'll be much more satisfied.
40mph diff? 50mph diff?
1) Probably not as much of a thrill as you think it will be. It'll take a long time to get to speed and there's nothing to feel when accelerating so slowly.
2) Need a massive space to do it safely
3) Even if using a massive area, you probably wont have the proper safety personnel present (EMTs, fire, etc)
4) Its an rx7, take it for some twisty's. You'll be much more satisfied.
40mph diff? 50mph diff?
05-22-10, 02:19 PM
#17
http://www.youtube.com/watch?v=ORh0xJV0y00
He was driving strait, didn't workout so well for him now did it.
He was driving strait, didn't workout so well for him now did it.
05-22-10, 02:53 PM
#19
ls1? jk jk jk
honestly, safety first. but i dont think you can do it on a 13b, even with 13b-re block with rx-8 rotors. maybe if you had naws, but you would need either a huge 125 shot, or like 4 20 pound bottles to hold a 50shot for a long time, don't forget the bottle warmers.
honestly, safety first. but i dont think you can do it on a 13b, even with 13b-re block with rx-8 rotors. maybe if you had naws, but you would need either a huge 125 shot, or like 4 20 pound bottles to hold a 50shot for a long time, don't forget the bottle warmers.
05-22-10, 03:21 PM
#20
Full Member
Thread Starter
this is off topic but can you fit a 93+ rx7 engine into a 2nd gen?? rx7store.net has a 93+ with a fat turbo on it, race ported, for like 3 grand, maybe 4 after every little thing but that would the job!!
05-22-10, 04:03 PM
#23
Eats, Sleeps, Dreams Rotary
There's no f*cking way a stock block NA FC will hit 160 MPH actual speed. You might get it indicated if you put 13" tires on it or change differential/speedo gear until it's 30% off.
There's simply too much air resistance and not enough power. If you had maybe 300 HP it would be possible.
There's simply too much air resistance and not enough power. If you had maybe 300 HP it would be possible.
05-22-10, 10:25 PM
#24
Full Member
Thread Starter
@MaczPayne, i went to FAQ and searched "swap" and got nothing, i know people will get mad if i post a thread titled "is it possible to put a 93+ 2 rotor in a 2nd gen" so yea haha
05-22-10, 11:09 PM
#25
https://www.rx7club.com/showthread.p...55#post5131155
5th post about half way down.
And for the original question, as others have said, I think it will take a lot of time and money and will definitely not be as cool as you think it will be. There are much better ways to invest your time and money into your car.
5th post about half way down.
And for the original question, as others have said, I think it will take a lot of time and money and will definitely not be as cool as you think it will be. There are much better ways to invest your time and money into your car.