Porting the waste gate
06-28-03, 03:36 AM
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: Utah
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Porting the waste gate
How do you port the waste gate? Were could i learn from a how to? Or can you guys help me out?
If you could atleast give me a basic idea. Thanks.
If you could atleast give me a basic idea. Thanks.
06-28-03, 03:41 AM
#2
EIT
Join Date: Jan 2002
Location: Austin, TX
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
1. Take the turbo off the car.
2. Remove back plate from exhuast side of turbo
3. Remove clip that holds wastegate rod to wastegate arm.
4. Using a die grinder/dremel enlarge the wastegate hole.
5. Put the turbo back together and stick on the car.
2. Remove back plate from exhuast side of turbo
3. Remove clip that holds wastegate rod to wastegate arm.
4. Using a die grinder/dremel enlarge the wastegate hole.
5. Put the turbo back together and stick on the car.
Thread
Thread Starter
Forum
Replies
Last Post