Plese, help me to finish my swap!!!
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Troy, NY
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Plese, help me to finish my swap!!!
HI for the last two months my friend and I have been woking in my S5 tII JSPEC into my s4 NA. Now i have the problem to connect the engine harnes to my car harnes as you know s4 with s5 harnes doesn't match and I have been looking at the diagram but everything is in codes and I NEEDto know what are the color of each wire for my s4 and for my s5
can somebody please help me or give me a link where i can find the information
I appreciate your help THANK YOU!
can somebody please help me or give me a link where i can find the information
I appreciate your help THANK YOU!
#2
IIMMM BBAAACCKKK!!
iTrader: (8)
wish i could help...... but i swapped the entire cars wiring harness when i did my swap...... good luck...... but it took 2 months... good god thats a long time.... it took me 1 week to do everything harnesses, motor, trans, rearend.. ect....... were you missing things
#4
just buy a standalone. Actually if you buy a haltech from Paul at K2RD he offers a preterminated wiring harness for your s5 engine. This will help with days of wiring nightmares you are going to have. Also standalone should have been the first thing you bought anyway
#5
B O R I C U A
iTrader: (14)
Originally Posted by PoderRotativo
HI for the last two months my friend and I have been woking in my S5 tII JSPEC into my s4 NA. Now i have the problem to connect the engine harnes to my car harnes as you know s4 with s5 harnes doesn't match and I have been looking at the diagram but everything is in codes and I NEEDto know what are the color of each wire for my s4 and for my s5
can somebody please help me or give me a link where i can find the information
I appreciate your help THANK YOU!
can somebody please help me or give me a link where i can find the information
I appreciate your help THANK YOU!
If you have the $$$, I also suggest a stand alone.
#6
B O R I C U A
iTrader: (14)
Originally Posted by Bukwild
just buy a standalone. Actually if you buy a haltech from Paul at K2RD he offers a preterminated wiring harness for your s5 engine. This will help with days of wiring nightmares you are going to have. Also standalone should have been the first thing you bought anyway
I thought K24d was out of bussines! I would love to take a look at their camber adjusters
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM