ok this coolant hose under the UIM that goes to the block....if tahts harcore kinked.....would it casue a bad idle? whats the function and yes i have tried searching...all i get it TB mod info...thats not waht im after...i just wany my baby to idle good again....: (

please and thankyou very much everyone!

 

If you're referring to the 90 degree angle hose that goes from your TB to the irons then no, it's supposed to be bent at a right angle.

 

That hose carries collant. It goes through the throttle body its to warm up the area for the fast idle system. Theres a wax in the fast idle system that like melts and adjusts the idle when it reaches operating temp. Unfortunatly this system can **** up real easily and can mess with the idle. There is a check for it in the FSM but its a pain in the *** to do due to limited space. I had this same problem then i performened the TB mod and it completly went away.

 

thank man....thanx alot it makes sense since its kinked im assuming its throwing it all off...im unkink it...and pray that it idles well.....lol

 

Mines blocked off....makes taking the uim off 100x easier...considering I take it off about 1-2 times a week =/