Turblown

iTrader: (12)

Been working on this for 3 days now, takes forever to strip every non essential wire out of the entire car... I also scrapped everything else under the dash along with the wipers. I'm going to have bdc do a half bridge on my motor soon, and strap on a T70

Keep in mind I am not done with the wiring, it will be cleaned up more and the relays have been moved up several inches.. Dash Is going back in soon.

88IntegraLS

Great job!

fcfdfan

I am watching one of my FC fantasies come true. Great pictures! Can you fill in more detail about how you planned it? Can you update as you go and let us know how things worked, didn't work, and what you might do differently.

Do I need to be an electrical genius to do this, or just the fearless halfwit that I am?

Good luck with the project!

Turblown

iTrader: (12)

It was pretty easy to do, just weed out wires that are not plugged in, take out fused wires that are not in use, get rid of sub looms ect. The only thing you have to worry about is wires that are connected to others, ie: back of the fuse box some of the power wires power several things.

Im going to run my Haltech loom through the heater core holes, won't be able to see any wires

fcfdfan

Followed your sig mods to the FC3s site. I'm guessing that emissions in MN aren't as Nazified as in CA.

Great ride, man!

Turblown

iTrader: (12)

There are no emission in MN Thxs for the compliments
I finished that portion, moved the haltech relays/fuses to the panel and ran the haltech harness through the heater core hole, not much of any wires are going to be showing under the the hood !