Pix of progress and some old mods
05-12-03, 09:56 PM
#1
Pix of progress and some old mods
Final Position of BOV
The rear, finally got a piece of hose on that bac valve
Custom WG bracket, before w/g hit fender and made the turbo sit angled
Defi link system control box ghetto mounted, does anyone know of anything that will stick to that vinyl?? I have tried double sided tape and super glue...
Rb rear sway bar and links
I will be ordering the Ic bracket tonight, but is it me or has this Ic hose shrunk??
Solved alternator hitting Ic problem, just took out and moved the alternator + connection piece...its adjustable
I just threw my tranny in too, something was stuck and the bushings had broken off and fell into my shifter linkage...
I am ordering the final parts to my puzzle; new haltech harness and k2rd secondary rail
The rear, finally got a piece of hose on that bac valve
Custom WG bracket, before w/g hit fender and made the turbo sit angled
Defi link system control box ghetto mounted, does anyone know of anything that will stick to that vinyl?? I have tried double sided tape and super glue...
Rb rear sway bar and links
I will be ordering the Ic bracket tonight, but is it me or has this Ic hose shrunk??
Solved alternator hitting Ic problem, just took out and moved the alternator + connection piece...its adjustable
I just threw my tranny in too, something was stuck and the bushings had broken off and fell into my shifter linkage...
I am ordering the final parts to my puzzle; new haltech harness and k2rd secondary rail
05-13-03, 10:07 AM
#3
REINCARNATED
iTrader: (4)
Revvin.. you truly have no life. That is an absolute perfect depliction of what a 2nd generation Rx-7 turbo should look like. I'm glad to see that it's comming along.. good luck finishing her off
-Markus
"Only an Rx-7 driver know's the sound of a Rotary, a mile away!"
-Markus
"Only an Rx-7 driver know's the sound of a Rotary, a mile away!"
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM