Pill In Map sensor hose?
#1
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Pill In Map sensor hose?
my engine is an S5 TII Running as an S4 TII with s4 Electronics BUT an FD upper and FD TPS.
now,My Problem is the Car will Run Just FINE with the TPS off the Throttle body(not screwed on) BUT If I attach the TPS to the TB it will buck and chuck,fart,snort etc!
I heard about a PILL that is in a Hose going to the Map sensor?
would that create a Problem If I did not have it on my Setup?
now,My Problem is the Car will Run Just FINE with the TPS off the Throttle body(not screwed on) BUT If I attach the TPS to the TB it will buck and chuck,fart,snort etc!
I heard about a PILL that is in a Hose going to the Map sensor?
would that create a Problem If I did not have it on my Setup?
#4
Eats, Sleeps, Dreams Rotary
iTrader: (1)
The pill evens out the signal. In my case, without the pill, the rapid flow to the pressure sensor caused a rapid spike and as the electronics couldn't adapt that quickly the engine actually detonated as it read over the 12lbs max the unit is designed to accomodate, but with the pill, a more even flow was recognized and no problems.
#7
Are you experienced?
iTrader: (18)
Restrictor pill has nothing to do with it, but if you need one go to advance auto and look in the vacuum line section for a line restrictor. They usually have them on hand.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM