Pictures of your7 with flush rim offset
02-23-07, 06:15 PM
#76
unfortunately i used the wrong setting on my camera as i was in a hurry so i'll get a better pic when i have time, the car also needs to be washed anyways.
as i mentioned earlier the wheels are:
ADR Cypher
18X8.5 +35 with 245/35R18 tires in front
18X9.5 +35 (not even sure they make this wide of a wheel in this series anymore
)with 285/35R18 tires in rear
no fender rolling or modifications needed for rears to fit, fronts needed about 6-8mm of fender rolling but the car is dropped ~2" front and rear so the front is tucked very close.
suspension is full HKS HiperD coilovers so it helps with clearance in the front, camber is a little turned in but nothing drastic.
as i mentioned earlier the wheels are:
ADR Cypher
18X8.5 +35 with 245/35R18 tires in front
18X9.5 +35 (not even sure they make this wide of a wheel in this series anymore
)with 285/35R18 tires in rearno fender rolling or modifications needed for rears to fit, fronts needed about 6-8mm of fender rolling but the car is dropped ~2" front and rear so the front is tucked very close.
suspension is full HKS HiperD coilovers so it helps with clearance in the front, camber is a little turned in but nothing drastic.
Last edited by RotaryEvolution; 02-23-07 at 06:22 PM.
02-24-07, 01:59 AM
#77
Banned. I got OWNED!!!
Originally Posted by Karack
suspension is full HKS HiperD coilovers so it helps with clearance in the front, camber is a little turned in but nothing drastic.
Originally Posted by Nismonic
I too have the same size Rezaxs (Mine didn't require fender rolling though)... I want to see what those wheels with a black center look like... any pictures?
On my old car... No current pics of them... :-/
02-24-07, 01:45 PM
#80
Originally Posted by TehMonkay
Do the people with +35 all around with 225s in front and 255s in rear have to roll their fenders? Do they rub?
02-24-07, 02:25 PM
#81
Originally Posted by red_s5_fc3s
Did you have to do any fender rolling, require coil overs, or do these fit without any modification?
02-24-07, 02:42 PM
#83
Never Finished
iTrader: (10)
Join Date: Oct 2006
Location: Huntsville AL
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Jus103, what tire sizes are you running and what kind of suspension setup do you have?
I have som 18x9 +19 for the front and 18x9.5 +19 for the rear and trying to pick tire sizes.
Dustin
I have som 18x9 +19 for the front and 18x9.5 +19 for the rear and trying to pick tire sizes.
Dustin
02-25-07, 03:33 AM
#87
saving up for a gen III
Join Date: Feb 2007
Location: Los Angeles, CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
ok, im only fourteen and am planning on getting an rx7, obviously im new in the tuning area and am just wondering what "rolled fenders" are. also, is it expensive?
02-25-07, 03:54 AM
#88
Full Member
Join Date: Aug 2003
Location: bay area
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
rolled fenders can be expensive if done by a pro, and can be free if done by yourself. Its when you bend the inside of the fender to make more clearance for the tire. If you feel the wheel well edge of a fender u can feel a 90 degree bend at the edge where the fender metal goes in about 1cm or so. This is bent straight up for room. If you buy a roller, its about $250 dollars and if u get it done at a shop its whatever they charge. I did it with a baseball bat and did it for free. My paint cracked though
02-25-07, 03:57 AM
#89
saving up for a gen III
Join Date: Feb 2007
Location: Los Angeles, CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
thanx sleepy
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
Last edited by illgraff; 02-25-07 at 04:09 AM.
02-25-07, 04:24 AM
#90
Originally Posted by illgraff
thanx sleepy
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
02-25-07, 05:44 AM
#91
Just to clarify I have not rolled any guards and have no scrubbing. I basically went off fc3spro site for recommendation's 
turbo80cid yes is definatly +28 on rear, is probably angle that makes it look slighty different.
turbo80cid yes is definatly +28 on rear, is probably angle that makes it look slighty different.
02-25-07, 12:55 PM
#92
Banned. I got OWNED!!!
Originally Posted by sleeepyhead
rolled fenders can be expensive if done by a pro, and can be free if done by yourself. Its when you bend the inside of the fender to make more clearance for the tire. If you feel the wheel well edge of a fender u can feel a 90 degree bend at the edge where the fender metal goes in about 1cm or so. This is bent straight up for room. If you buy a roller, its about $250 dollars and if u get it done at a shop its whatever they charge. I did it with a baseball bat and did it for free. My paint cracked though
02-25-07, 03:56 PM
#93
Army Strong...or somethin
iTrader: (3)
Join Date: Jan 2004
Location: Green Bay, WI
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by illgraff
thanx sleepy
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
does/did anyone else have the problem of finding 4x114.3 bolt patterned rims for the 87 rx?
