Picture of my new gauge pod and gauge
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,053
Likes: 0
From: Norwich, CT
Picture of my new gauge pod and gauge
I came, I saw, I boosted.
Joined: Apr 2001
Posts: 1,921
Likes: 0
From: Windsor, Ontario, Canada
Hey tmak26b- Listen- Every single link you make to your home page DOESN'T WORK!!! They never have!!!!!!!
I'm not sure if you knew it or not... maybe you can figure out what's wrong- I'd love to see your page!
Dan.
I'm not sure if you knew it or not... maybe you can figure out what's wrong- I'd love to see your page!
Dan.
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,053
Likes: 0
From: Norwich, CT
Dan, they dont work because geocities dont allow remote linking. What you have to do is to either type in the whole address yourself, copy and paste it. Or go to teh top and highlight the address on location, and then hit enter.
Junior Member
Joined: Sep 2001
Posts: 36
Likes: 0
From: Northern Cali
I get tmak's pics to work by typing in http://www.geocities.com/tmak26b/
and then after that loads, adding the name of the picture to the end of the address. Usually works for me.
and then after that loads, adding the name of the picture to the end of the address. Usually works for me.
Trending Topics
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,053
Likes: 0
From: Norwich, CT
If you have a din opening, it will snap right it. It has these little legs that reach out and grab on to the surround. Yes I am going to mount it under the radio. I have to start hacking the kit that I have to fit this in. I am going to tweeters today to buy one i can hack with. I thought about mounting the radio on the bottom and this top, but it wont work because i wont be able to change CD with the shifter in 5th 3rd or 1st
Full Member
Joined: Aug 2001
Posts: 182
Likes: 0
From: Somewhere
Originally posted by tmak26b
If you have a din opening, it will snap right it. It has these little legs that reach out and grab on to the surround. Yes I am going to mount it under the radio. I have to start hacking the kit that I have to fit this in. I am going to tweeters today to buy one i can hack with. I thought about mounting the radio on the bottom and this top, but it wont work because i wont be able to change CD with the shifter in 5th 3rd or 1st
If you have a din opening, it will snap right it. It has these little legs that reach out and grab on to the surround. Yes I am going to mount it under the radio. I have to start hacking the kit that I have to fit this in. I am going to tweeters today to buy one i can hack with. I thought about mounting the radio on the bottom and this top, but it wont work because i wont be able to change CD with the shifter in 5th 3rd or 1st
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,053
Likes: 0
From: Norwich, CT
I will i will, heading down to tweeters tonight to hopefully get an adapter. I might have to order the oil psi and temp gauge, might as well put it all in while its out. But then I want to get an A/F gauge too since i am getting a MD computer chip. Now I have to find a place to mount that.
